- Use format strings
- Use enum field instead of magic number
- Cast to enum type
- Add type annotations to parse functions
- Improve docstrings mentioning Set types where function accepts Iterable
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This enables AAP 2.0 clients to receive status reports with a new ADU
flag (as we already deliver BIBE bundles). Moreover, it allows clients
to set a report-to EID and sets all of the status report flags on newly
created bundles in case a report-to EID is provided.
Closes: #241
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This introduces a JSON contact configuration format for the
deterministic first-contact forwarding (DFCF) implementation as a modern
alternative to our homebrewn configuration messages. For now, it is only
supported in the external DFCF BDM, but integration into the "router
agent" is planned.
Example JSON configuration string (from our tests):
```
{
"command": "ADD",
"node_id": "dtn://ud3tn2.dtn/",
"cla_addr": "mtcp:127.0.0.1:4223",
"reachable_eids": [
"ipn:1.0"
],
"contact_list": [
{
"start": 1401519306972,
"end": 1401519316972,
"data_rate": 2400,
"reachable_eids": [
"dtn://66553/",
"dtn://89326/"
]
},
{
"start": 1401519506972,
"end": 1401519516972,
"data_rate": 1200,
"reachable_eids": [
"dtn://12349/",
"dtn://89326/"
]
}
]
}
```
Closes: #15
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
We implicitly expected all incoming config message data structures to
contain a list of contacts as well as a list of reachable EIDs in both the
config message and each contact in the contact list itself. This may not
always be the case if the config command does not contain such fields.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
Previously, we were relying on a race condition for re-scheduling: if a
suitable contact is ongoing, even if it is in the process of being
dropped, it will be considered for re-scheduling a bundle.
This explicitly ignores the contact being dropped.
Due to the increased complexity, `_calc_bundle_schedule` is refactored
slightly.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
When we update an existing contact, e.g, to change the set of reachable
EIDs, we delete the previous entry, cancel the task, and add a new
entry. For this to work, we must wait for the task to terminate after
cancellation.
Additionally, we relax the check for which contacts to update to include
contacts that compare equal, which might be the case if only the
"reachable EIDs" list is different.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This would result in conflicts. We previously used an assertion to
ensure it, however, this could be triggered by external config commands
and crashed the BDM.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
If the link cannot be established, we need a timeout to remove the
contact from the active contacts set.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This re-impplements the QUERY command through our configuration
interface so we can get the contact plan back out of the BDM.
aap2_config.py is extended such that it allows for querying and deleting
contacts.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
As this can also be used for the built-in routing agent, we provide the
functionality in the shared Python module.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
Regenerates the Python protobuf bindings with the updated `protoc`.
```sh
make aap2-proto-headers
make storage-agent-proto-headers
```
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
As Python 3.8 is end-of-life and the latest python-protobuf package
requires at least Python 3.9, the minimum Python version is set to 3.9.
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
As discussed in !214 we add a validation based on `argparse` so the user
receives a nice error message when trying to pass an empty string to an
argument for which this is not valid.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
Since the updated nixpkgs contains a new python.protobuf package version
(4.25.3 -> 5.28.3), the language bindings are regenerated.
See: https://gitlab.com/d3tn/ud3tn/-/issues/200
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
setuptools >= v62.5 supports dynamic dependencies, which allow to read
dependencies from a file. This prevents dependencies from being repeated
twice.
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
The defaults for the AAP and AAP 2.0 TCP ports were the same. Thus, if
we specify a TCP host for both, µD3TN will terminate on startup as the
port is already in use by one agent but it tries to bind to it with
both.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This performs the following actions:
- change overall documentation tree to adjust to existing material
- add CSS for improved visuals
- add folders to improve structure
- move the README of the Contact Plan Reader to the doc folder and integrate it into the documentation
- add file for 'Home' to provide a starting point for the documentation
Signed-off-by: Fiona Fuchs <fiona.fuchs@d3tn.com>
When connecting to µD3TN with the client behind a NAT gateway, the connection
may be dropped silently after a while if no data is flowing from µD3TN to the
AAP 2.0 subscriber (i.e., if no bundles are received for a while). µD3TN
allows us to set a keepalive interval to prevent this, which was however
only exposed by aap2-receive and aap2-ping previously. As the BDMs may
also hold long-living receiving connections, this capability is added to
them as well.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This was confusing users. We are adding a detailed explanation in the
man page and informing in the help text that the parameter refers to the
administrative endpoint of uD3TN.
Fixes: #213
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
If the bundle must not be fragmented and, thus, `min_frag_size_first`
equals `serialized_size` and `min_frag_size_last` equals zero, we must
not treat `min_frag_size_first` as header size and add it to the
remaining payload size in the calculation of the total serialized size
in the BDM.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
It is often required to print a proper error message if an unexpected
ResponseStatus is received from µD3TN. Because ResponseStatus is an enum
generated by Protobuf, there seems to be no easy-to-use `name` property.
Thus, we provide a function for mapping the integer values to a readable
string representation in the AAP2Client class.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
The FIB fulfils two purposes: 1) map node IDs to next-hop CLA addresses
and 2) store the current status of a link associated with a given CLA
address.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This adapts the v1 tools to the recent changes in the AAPv2 tools so
they use the same return codes and (error) messages.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
We are using exceptions for signaling users of the AAP2Client that
communication with µD3TN failed when receiving data, however, we did not
differentiate between normal connection closure and abnormal conditions.
This adds a `AAP2ServerDisconnected` exception to signal that µD3TN has
closed the connection. The supplied tools are adapted to properly handle
both this new exception and other usual cases for termination such as
keyboard interrupts, so that no unnecessary stack traces are printed.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This extends the message printed by aap_contact_plan_reader.py to
explain that it can still be used if we launch µD3TN with the
--allow-remote-config commandline flag.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This script is outdated as it does not support the newest approach to
filter bundles and also does not support the authorization required by
the storage agent (the flag is set via AAP 2.0).
aap2_storage_agent.py should be used instead.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This uses the value provided via AAPv2 to reduce the size of the
scheduled bundles to ensure the maximum bundle size is not exceeded.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
We should be able to honor the fragmentation threshold again. This
passes the maximum bundle size variable to the AAPv2 agent. The value is
determined as the minimum of all maximum bundle sizes reported by the
CLAs and the one specified on the command line, with the special case
of the value 0, which means a maximum bundle size of 2^64 ("unlimited").
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
Since the last update of the cbor[^1] library was in 2016 and the
repository no longer even exists, the cbor2[^2] python library is now
used instead.
[^1]: https://pypi.org/project/cbor/
[^2]: https://pypi.org/project/cbor2/
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
Changes all occurrences of the old script paths from tools/ to the
scripts installed by python-ud3tn-utils.
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
- Moves `tools/aap` + `tools/aap2` to `python-ud3tn-utils/aap*/bin/` to
add the scripts to the python package
- Adds a `main()` function to each script to reference it
- Define `logger` as global variable
- Adds a symbolic link to keep compatibility with existing tooling
- Moves `tools/aap/aap_test.py` to `test/functional/`
- Adds additional dependencies (pyd3tn, cbor) to python-ud3tn-utils and
the corresponding nix package
- Add scripts to python-ud3tn-utils `pyproject.toml`
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
`pyproject.toml` is the new unified Python project settings file
that replaces `setup.py` and other build-systems by introducing a
build-system independent format for source trees. The installation of
setuptools and wheel is no longer necessary as it is automatically
bootstrapped.
https://peps.python.org/pep-0517/
Signed-off-by: Maximilian Nitsch <maximilian.nitsch@d3tn.com>
With the addition of the storage agent and the compat. BDM we have the
issue that two new agents accept configuration through bundles, which
cannot check that those bundles come from trustworthy sources. In the
past we restricted contact configuration messages to local clients and
performed an "EID spoofing detection" so that we could check the source
EID - if it is the same as the local node ID, we allowed the
configuration bundle to be processed. With AAPv2 and potentially more
security-relevant components (such as BDMs) appearing in the future, we
need a new mechanism.
The idea behind the implemented mechanism is to reuse the existing AAP
2.0 shared-secret authentication that is applied for BDMs themselves
also for sending configuration messages: We add the possibility to
register an AAP 2.0 RPC agent (one that sends commands *toward* uD3TN)
with the "dispatch" authorization flag. This client can then request a
special flag to be added when sending bundles. The new flag is only
added internally by uD3TN to its in-memory data structure and is
delivered to all internal agents as well as AAP 2.0 clients receiving
the marked bundles. Those agents and clients (such as the sqlite/storage
agent) can then easily check for the flag to be present and thus
determine whether the bundle comes from an authenticated and authorized
source.
Note: The `adu_flags` field for the BundleADU AAP 2.0 message is now a
`repeated` field to represent the option of multiple flags being present
(Protobuf does not support bit fields for this purpose).
Fixes: #187
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
When transmission had been attempted and generated a "TX
success/failure" result, the BDM will need the information which
transmission is affected by the generated dispatch. Additionally, the
term "DispatchRequest" is imprecise, as uD3TN does not require the BDM
to dispatch the bundle in any case (it can do so, but especially after
TX success/failure, oftentimes, it is intended to just proceed with
normal bundle processing).
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
This adds a "flags" field to the FIB link, allowing for configuring a
link for "direct dispatch", i.e., to make it usable without first
contacting a BDM. It is important to make this optional as otherwise
contact-based routing and QoS could not be implemented properly via a
BDM.
Signed-off-by: Felix Walter <felix.walter@d3tn.com>
