trivial: clean up typos and comments

client.go

@@ -272,9 +272,7 @@ func (s *Client) FetchSwaps(ctx context.Context) ([]*SwapInfo, error) {
 // restored from persistent storage and resumed.  Subsequent updates will be
 // sent through the passed in statusChan. The function can be terminated by
 // cancelling the context.
-func (s *Client) Run(ctx context.Context,
-	statusChan chan<- SwapInfo) error {
-
+func (s *Client) Run(ctx context.Context, statusChan chan<- SwapInfo) error {
 	if !atomic.CompareAndSwapUint32(&s.started, 0, 1) {
 		return errors.New("swap client can only be started once")
 	}
@@ -284,7 +282,7 @@ func (s *Client) Run(ctx context.Context,
 		s.lndServices.NodeAlias, s.lndServices.NodePubkey,
 		lndclient.VersionString(s.lndServices.Version))
 
-	// Setup main context used for cancelation.
+	// Setup main context used for cancellation.
 	mainCtx, mainCancel := context.WithCancel(ctx)
 	defer mainCancel()
 
@@ -307,7 +305,7 @@ func (s *Client) Run(ctx context.Context,
 
 		s.resumeSwaps(mainCtx, pendingLoopOutSwaps, pendingLoopInSwaps)
 
-		// Signal that new requests can be accepted. Otherwise the new
+		// Signal that new requests can be accepted. Otherwise, the new
 		// swap could already have been added to the store and read in
 		// this goroutine as being a swap that needs to be resumed.
 		// Resulting in two goroutines executing the same swap.

executor.go

@@ -71,34 +71,35 @@ func (s *executor) run(mainCtx context.Context,
 	for {
 		blockEpochChan, blockErrorChan, err =
 			s.lnd.ChainNotifier.RegisterBlockEpochNtfn(mainCtx)
-		if err != nil {
-			if strings.Contains(err.Error(),
-				"in the process of starting") {
 
-				log.Warnf("LND chain notifier server not " +
-					"ready yet, retrying with delay")
-
-				// Give chain notifier some time to start and
-				// try to re-attempt block epoch subscription.
-				select {
-				case <-time.After(500 * time.Millisecond):
-					continue
-
-				case <-mainCtx.Done():
-					return err
-				}
-			}
-
-			return err
+		if err == nil {
+			break
 		}
 
-		break
+		if strings.Contains(err.Error(),
+			"in the process of starting") {
+
+			log.Warnf("LND chain notifier server not ready yet, " +
+				"retrying with delay")
+
+			// Give chain notifier some time to start and try to
+			// re-attempt block epoch subscription.
+			select {
+			case <-time.After(500 * time.Millisecond):
+				continue
+
+			case <-mainCtx.Done():
+				return err
+			}
+		}
+
+		return err
 	}
 
-	// Before starting, make sure we have an up to date block height.
-	// Otherwise we might reveal a preimage for a swap that is already
+	// Before starting, make sure we have an up-to-date block height.
+	// Otherwise, we might reveal a preimage for a swap that is already
 	// expired.
-	log.Infof("Wait for first block ntfn")
+	log.Infof("Wait for first block notification")
 
 	var height int32
 	setHeight := func(h int32) {
@@ -118,7 +119,7 @@ func (s *executor) run(mainCtx context.Context,
 	// Start main event loop.
 	log.Infof("Starting event loop at height %v", height)
 
-	// Signal that executor being ready with an up to date block height.
+	// Signal that executor being ready with an up-to-date block height.
 	close(s.ready)
 
 	// Use a map to administer the individual notification queues for the

loopd/daemon.go

@@ -95,7 +95,7 @@ func New(config *Config, lisCfg *ListenerCfg) *Daemon {
 		// We send exactly one error on this channel if something goes
 		// wrong at runtime. Or a nil value if the shutdown was
 		// successful. But in case nobody's listening, we don't want to
-		// block on it so we buffer it.
+		// block on it, so we buffer it.
 		ErrChan: make(chan error, 1),
 
 		quit:        make(chan struct{}),
@@ -135,9 +135,9 @@ func (d *Daemon) Start() error {
 	if errors.Is(err, bbolt.ErrTimeout) {
 		// We're trying to be started as a standalone Loop daemon, most
 		// likely LiT is already running and blocking the DB
-		return fmt.Errorf("%v: make sure no other loop daemon "+
-			"process (standalone or embedded in "+
-			"lightning-terminal) is running", err)
+		return fmt.Errorf("%v: make sure no other loop daemon process "+
+			"(standalone or embedded in lightning-terminal) is"+
+			"running", err)
 	}
 	if err != nil {
 		return err
@@ -166,9 +166,9 @@ func (d *Daemon) Start() error {
 func (d *Daemon) StartAsSubserver(lndGrpc *lndclient.GrpcLndServices,
 	withMacaroonService bool) error {
 
-	// There should be no reason to start the daemon twice. Therefore return
-	// an error if that's tried. This is mostly to guard against Start and
-	// StartAsSubserver both being called.
+	// There should be no reason to start the daemon twice. Therefore,
+	// return an error if that's tried. This is mostly to guard against
+	// Start and StartAsSubserver both being called.
 	if atomic.AddInt32(&d.started, 1) != 1 {
 		return errOnlyStartOnce
 	}
@@ -179,8 +179,8 @@ func (d *Daemon) StartAsSubserver(lndGrpc *lndclient.GrpcLndServices,
 
 	// With lnd already pre-connected, initialize everything else, such as
 	// the swap server client, the RPC server instance and our main swap
-	// handlers. If this fails, then nothing has been started yet and we can
-	// just return the error.
+	// handlers. If this fails, then nothing has been started yet, and we
+	// can just return the error.
 	err := d.initialize(withMacaroonService)
 	if errors.Is(err, bbolt.ErrTimeout) {
 		// We're trying to be started inside LiT so there most likely is
@@ -370,8 +370,8 @@ func (d *Daemon) initialize(withMacaroonService bool) error {
 		}
 	}
 
-	// Both the client RPC server and and the swap server client should
-	// stop on main context cancel. So we create it early and pass it down.
+	// Both the client RPC server and the swap server client should stop
+	// on main context cancel. So we create it early and pass it down.
 	d.mainCtx, d.mainCtxCancel = context.WithCancel(context.Background())
 
 	log.Infof("Swap server address: %v", d.cfg.Server.Host)

loopd/swapclient_server.go

@@ -561,7 +561,7 @@ func (s *swapClientServer) LoopOutQuote(ctx context.Context,
 	}, nil
 }
 
-// GetTerms returns the terms that the server enforces for swaps.
+// GetLoopInTerms returns the terms that the server enforces for swaps.
 func (s *swapClientServer) GetLoopInTerms(ctx context.Context,
 	req *clientrpc.TermsRequest) (*clientrpc.InTermsResponse, error) {
 
@@ -579,7 +579,7 @@ func (s *swapClientServer) GetLoopInTerms(ctx context.Context,
 	}, nil
 }
 
-// GetQuote returns a quote for a swap with the provided parameters.
+// GetLoopInQuote returns a quote for a swap with the provided parameters.
 func (s *swapClientServer) GetLoopInQuote(ctx context.Context,
 	req *clientrpc.QuoteRequest) (*clientrpc.InQuoteResponse, error) {
 

loopin.go

@@ -817,8 +817,9 @@ func (s *loopInSwap) waitForSwapComplete(ctx context.Context,
 		return fmt.Errorf("subscribe to swap invoice: %v", err)
 	}
 
-	// checkTimeout publishes the timeout tx if the contract has expired.
-	checkTimeout := func() (btcutil.Amount, error) {
+	// publishTxOnTimeout publishes the timeout tx if the contract has
+	// expired.
+	publishTxOnTimeout := func() (btcutil.Amount, error) {
 		if s.height >= s.LoopInContract.CltvExpiry {
 			return s.publishTimeoutTx(ctx, htlcOutpoint, htlcValue)
 		}
@@ -829,7 +830,7 @@ func (s *loopInSwap) waitForSwapComplete(ctx context.Context,
 	// Check timeout at current height. After a restart we may want to
 	// publish the tx immediately.
 	var sweepFee btcutil.Amount
-	sweepFee, err = checkTimeout()
+	sweepFee, err = publishTxOnTimeout()
 	if err != nil {
 		return err
 	}
@@ -848,7 +849,7 @@ func (s *loopInSwap) waitForSwapComplete(ctx context.Context,
 		case notification := <-s.blockEpochChan:
 			s.height = notification.(int32)
 
-			sweepFee, err = checkTimeout()
+			sweepFee, err = publishTxOnTimeout()
 			if err != nil {
 				return err
 			}
@@ -971,7 +972,7 @@ func (s *loopInSwap) processHtlcSpend(ctx context.Context,
 	sweepFee btcutil.Amount) error {
 
 	// Determine the htlc input of the spending tx and inspect the witness
-	// to findout whether a success or a timeout tx spend the htlc.
+	// to find out whether a success or a timeout tx spent the htlc.
 	htlcInput := spend.SpendingTx.TxIn[spend.SpenderInputIndex]
 
 	if s.htlc.IsSuccessWitness(htlcInput.Witness) {