The thread does not only load blocks, it loads the mempool and,
in a future commit, will start the indexes as well.
Also, renamed the 'ThreadImport' function to 'ImportBlocks'
And the 'm_load_block' class member to 'm_thread_load'.
-BEGIN VERIFY SCRIPT-
sed -i "s/ThreadImport/ImportBlocks/g" $(git grep -l ThreadImport -- ':!/doc/')
sed -i "s/loadblk/initload/g" $(git grep -l loadblk -- ':!/doc/release-notes/')
sed -i "s/m_load_block/m_thread_load/g" $(git grep -l m_load_block)
-END VERIFY SCRIPT-
The mempool load can take a while, and it is not
needed for the indexes' synchronization.
Also, having the mempool load function call
inside 'blockstorage.cpp' wasn't structurally
correct.
FatalError replaces what previously was the AbortNode function in
shutdown.cpp.
This commit is part of the libbitcoinkernel project and further removes
the shutdown's and, more generally, the kernel library's dependency on
interface_ui with a kernel notification method. By removing interface_ui
from the kernel library, its dependency on boost is reduced to just
boost::multi_index. At the same time it also takes a step towards
de-globalising the interrupt infrastructure.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: TheCharlatan <seb.kung@gmail.com>
This is done in addition with the following commit. Both have the goal
of getting rid of direct calls to AbortNode from kernel code. This extra
flushError method is added to notify specifically about errors that
arrise when flushing (syncing) block data to disk. Unlike other
instances, the current calls to AbortNode in the blockstorage flush
functions do not report an error to their callers.
This commit is part of the libbitcoinkernel project and further removes
the shutdown's and, more generally, the kernel library's dependency on
interface_ui with a kernel notification method. By removing interface_ui
from the kernel library, its dependency on boost is reduced to just
boost::multi_index. At the same time it also takes a step towards
de-globalising the interrupt infrastructure.
This and the following commit seek to decouple the libbitcoinkernel
library from the shutdown code. As a library, it should it should have
its own flexible interrupt infrastructure without relying on node-wide
globals.
The commit takes the first step towards this goal by de-globalising
`ShutdownRequested` calls in kernel code.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: TheCharlatan <seb.kung@gmail.com>
32e2ffc393 Remove the syscall sandbox (fanquake)
Pull request description:
After initially being merged in #20487, it's no-longer clear that an internal syscall sandboxing mechanism is something that Bitcoin Core should have/maintain, especially when compared to better maintained/supported alterantives, i.e [firejail](https://github.com/netblue30/firejail).
There is more related discussion in #24771.
Note that given where it's used, the sandbox also gets dragged into the kernel.
If it's removed, this should not require any sort of deprecation, as this was only ever an opt-in, experimental feature.
Closes#24771.
ACKs for top commit:
davidgumberg:
crACK https://github.com/bitcoin/bitcoin/pull/27896/commits/32e2ffc39374f61bb2435da507f285459985df9e
achow101:
ACK 32e2ffc393
dergoegge:
ACK 32e2ffc393
Tree-SHA512: 8cf71c5623bb642cb515531d4a2545d806e503b9d57bfc15a996597632b06103d60d985fd7f843a3c1da6528bc38d0298d6b8bcf0be6f851795a8040d71faf16
After initially being merged in #20487, it's no-longer clear that an
internal syscall sandboxing mechanism is something that Bitcoin Core
should have/maintain, especially when compared to better
maintained/supported alterantives, i.e firejail.
Note that given where it's used, the sandbox also gets dragged into the
kernel.
There is some related discussion in #24771.
This should not require any sort of deprecation, as this was only ever
an opt-in, experimental feature.
Closes#24771.
Since the kernel library no longer depends on the system file, move it
to the common library instead in accordance to the diagram in
doc/design/libraries.md.
With the previous move of AlertNotify out of the validation file, and
thus out of the kernel library, ScheduleBatchPriority is the last
remaining function used by the kernel library from util/system. Move it
to its own file, such that util/system can be moved out of the util
library in the following few commits.
Moving util/system out of the kernel library removes further networking
as well as shell related code from it.
This is achieved by letting the index sync thread wait until
reindex-chainstate is finished.
This also disables the pruning check when reindexing the chainstate (which is
incompatible with prune mode) because there would be no chain at this point
in init.
Add a stop_after_block_import field to the BlockManager options. Use
this field instead of the global gArgs.
This should allow users of the BlockManager to not rely on the global
Args.
Add a blocks_dir field to the BlockManager options. Move functions
relying on the global gArgs to get the blocks_dir into the BlockManager
class.
This should eventually allow users of the BlockManager to not rely on
the global Args and instead pass in their own options.
Remove access to the global gArgs for the fastprune argument and
replace it by adding a field to the existing BlockManager Options
struct.
When running `clang-tidy-diff` on this commit, there is a diagnostic
error: `unknown type name 'uint64_t' [clang-diagnostic-error] uint64_t
prune_target{0};`, which is fixed by including cstdint.
This should eventually allow users of the BlockManager to not rely on
the global gArgs and instead pass in their own options.
This is a commit in preparation for the next few commits. The functions
are moved to methods to avoid their re-declaration for the purpose of
passing in BlockManager options.
The functions that were now moved into the BlockManager should no longer
use the params as an argument, but instead use the member variable.
In the moved ReadBlockFromDisk and UndoReadFromDisk, change
the function signature to accept a reference to a CBlockIndex instead of
a raw pointer. The pointer is expected to be non-null, so reflect that
in the type.
To allow for the move of functions to BlockManager methods all call
sites require an instantiated BlockManager, or a callback to one.
8f14fc8622 test: cover fastprune with excessive block size (Matthew Zipkin)
271c23e87f blockstorage: Adjust fastprune limit if block exceeds blockfile size (Martin Zumsande)
Pull request description:
The debug-only `-fastprune` option used in several tests is not always safe to use:
If a `-fastprune` node receives a block larger than the maximum blockfile size of `64kb` bad things happen: The while loop in `BlockManager::FindBlockPos` never terminates, and the node runs oom because memory for `m_blockfile_info` is allocated in each iteration of the loop.
The same would happen if a naive user used `-fastprune` on anything other than regtest (so this can be tested by syncing on signet for example, the first block that crashes the node is at height 2232).
Change the approach by raising the blockfile size to the size of the block, if that block otherwise wouldn't fit (idea by TheCharlatan).
ACKs for top commit:
ryanofsky:
Code review ACK 8f14fc8622. Added new assert, test, and comment since last review
TheCharlatan:
ACK 8f14fc8622
pinheadmz:
ACK 8f14fc8622
Tree-SHA512: df2fea30613ef9d40ebbc2416eacb574f6d7d96847db5c33dda22a29a2c61a8db831aa9552734ea4477e097f253dbcb6dcb1395d43d2a090cc0588c9ce66eac3
If the added block exceeds the blockfile size in test-only
-fastprune mode, the node would get stuck in an infinite loop and
run out of memory.
Avoid this by raising the blockfile size to the size of the added block
in this situation.
Co-authored-by: TheCharlatan <seb.kung@gmail.com>
This is an extraction of ArgsManager related functions from util/system
into their own common file.
Config file related functions are moved to common/config.cpp.
The background of this commit is an ongoing effort to decouple the
libbitcoinkernel library from the ArgsManager. The ArgsManager belongs
into the common library, since the kernel library should not depend on
it. See doc/design/libraries.md for more information on this rationale.
The fs.* files are already part of the libbitcoin_util library. With the
introduction of the fs_helpers.* it makes sense to move fs.* into the
util/ directory as well.
b3e78dc91d refactor: Don't use global chainparams in chainstatemanager method (TheCharlatan)
382b692a50 Split non/kernel chainparams (Carl Dong)
edabbc78a3 Add factory functions for Main/Test/Sig/Reg chainparams (Carl Dong)
d938098398 Remove UpdateVersionBitsParameters (Carl Dong)
84b85786f0 Decouple RegTestChainParams from ArgsManager (Carl Dong)
76cd4e7c96 Decouple SigNetChainParams from ArgsManager (Carl Dong)
Pull request description:
This pull request is part of the `libbitcoinkernel` project https://github.com/bitcoin/bitcoin/issues/24303https://github.com/bitcoin/bitcoin/projects/18 and more specifically its "Step 2: Decouple most non-consensus code from libbitcoinkernel". dongcarl is the original author of this patchset, these commits were taken from https://github.com/dongcarl/bitcoin/tree/2022-03-libbitcoinkernel-chainparams-args-only.
#### Context
The bitcoin kernel library currently relies on code containing user configurations through the `ArgsManager`. This is not optimal, since as a stand-alone library it should not rely on bitcoind's argument parsing logic. Instead, its interfaces should accept control and options structs that control the kernel library's desired configuration.
Similar work towards decoupling the `ArgsManager` from the kernel has been done in
https://github.com/bitcoin/bitcoin/pull/25290, https://github.com/bitcoin/bitcoin/pull/25487, https://github.com/bitcoin/bitcoin/pull/25527 and https://github.com/bitcoin/bitcoin/pull/25862.
#### Changes
By moving the `CChainParams` class definition into the kernel and giving it new factory functions `CChainParams::{RegTest,SigNet,Main,TestNet}`it can be constructed without an `ArgsManager` reference, unlike the current factory function `CreateChainParams`.
The first few commits remove uses of `ArgsManager` within `CChainParams`. Then the `CChainParams` definition is moved to a new file in the `kernel/` subdirectory.
ACKs for top commit:
MarcoFalke:
re-ACK b3e78dc91d🛁
ryanofsky:
Code review ACK b3e78dc91d. Only changes since last review were recent review suggestions.
ajtowns:
ACK b3e78dc91d
Tree-SHA512: 3835aca1d3e3c75cc3303dd584bab3a77e58f6c678724a5e359fe4b0e17e0763a00931ee6191f516b9fde50496f59cc691f0709c0254206db3863bbf7ab2cacd
Moves chainparams code not using the ArgsManager to the kernel.
Subsequently use the kernel chainparams header now where possible in
order to further decouple chainparams call sites from gArgs.
error is a low-level function with a sole dependency on LogPrintf, which
is defined in logging.h
The background of this commit is an ongoing effort to decouple the
libbitcoinkernel library from the ArgsManager defined in system.h.
Moving the function out of system.h allows including it from a separate
source file without including the ArgsManager definitions from system.h.
3141eab9c6 test: add functional test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
e252909e56 test: add unit test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
77557dda4a prune: scan and unlink already pruned block files on startup (Andrew Toth)
Pull request description:
There are a few cases where we can mark a block and undo file as pruned in our block index, but not actually remove the files from disk.
1. If we call `FindFilesToPrune` or `FindFilesToPruneManual` and crash before `UnlinkPrunedFiles`.
2. If on Windows there is an open file handle to the file somewhere else when calling `fs::remove` in `UnlinkPrunedFiles` (https://en.cppreference.com/w/cpp/filesystem/remove, https://learn.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-deletefilew#remarks). This could be from another process, or if we are calling `ReadBlockFromDisk`/`ReadRawBlockFromDisk` without having a lock on `cs_main` (which has been allowed since ccd8ef65f9).
This PR mitigates this by scanning all pruned block files on startup after `LoadBlockIndexDB` and unlinking them again.
ACKs for top commit:
achow101:
ACK 3141eab9c6
pablomartin4btc:
re-ACK with added functional test 3141eab9c6.
furszy:
Code review ACK 3141eab9
theStack:
Code-review ACK 3141eab9c6
Tree-SHA512: 6c73bc57838ad1b7e5d441af3c4d6bf4c61c4382e2b86485e57fbb74a61240710c0ceeceb8b4834e610ecfa3175c6955c81ea4b2285fee11ca6383f472979d8d
