ReserveDestination::SetBlindingPubKey was removed since it was only used
in one place (in Wallet::GetNewChangeDestination), and after this change
it was silently breaking blinded change addresses by somehow replacing
the destination with CNoDestination...
This extra method will be needed for updating the filter set for
faster wallet rescans; after an internal top-up has happened, we only
want to add the newly created scriptPubKeys.
76b3c37fcb refactor: wallet: return util::Result from `GetReservedDestination` methods (Sebastian Falbesoner)
Pull request description:
This PR is a follow-up to #25218, as suggested in comment https://github.com/bitcoin/bitcoin/pull/25218#discussion_r907710067. The interfaces of the methods `ReserveDestination::GetReservedDestination`, `{Legacy,Descriptor,}ScriptPubKeyMan::GetReservedDestination` are improved by returning `util::Result<CTxDestination>` instead of `bool` in order to get rid of the two `CTxDestination&` and `bilingual_str&` out-parameters.
ACKs for top commit:
furszy:
ACK 76b3c37f
Tree-SHA512: bf15560a88d645bcf8768024013d36012cd65caaa4a613e8a055dfd8f29cb4a219c19084606992bad177920cdca3a732ec168e9b9526f9295491f2cf79cc6815
bc886fcb31 Change mapWallet to be a std::unordered_map (Andrew Chow)
272356024d Change getWalletTxs to return a set instead of a vector (Andrew Chow)
97532867cf Change mapTxSpends to be a std::unordered_multimap (Andrew Chow)
1f798fe85b wallet: Cache SigningProviders (Andrew Chow)
8a105ecd1a wallet: Use CalculateMaximumSignedInputSize to indicate solvability (Andrew Chow)
Pull request description:
While running my coin selection simulations, I noticed that towards the end of the simulation, the wallet would become slow to make new transactions. The wallet generally performs much more slowly when there are a large number of transactions and/or a large number of keys. The improvements here are focused on wallets with a large number of transactions as that is what the simulations produce.
Most of the slowdown I observed was due to `DescriptorScriptPubKeyMan::GetSigningProvider` re-deriving keys every time it is called. To avoid this, it will now cache the `SigningProvider` produced so that repeatedly fetching the `SigningProvider` for the same script will not result in the same key being derived over and over. This has a side effect of making the function non-const, which makes a lot of other functions non-const as well. This helps with wallets with lots of address reuse (as my coin selection simulations are), but not if addresses are not reused as keys will end up needing to be derived the first time `GetSigningProvider` is called for a script.
The `GetSigningProvider` problem was also exacerbated by unnecessarily fetching a `SigningProvider` for the same script multiple times. A `SigningProvider` is retrieved to be used inside of `IsSolvable`. A few lines later, we use `GetTxSpendSize` which fetches a `SigningProvider` and then calls `CalculateMaximumSignedInputSize`. We can avoid a second call to `GetSigningProvider` by using `CalculateMaximumSignedInputSize` directly with the `SigningProvider` already retrieved for `IsSolvable`.
There is an additional slowdown where `ProduceSignature` with a dummy signer is called twice for each output. The first time is `IsSolvable` checks that `ProduceSignature` succeeds, thereby informing whether we have solving data. The second is `CalculateMaximumSignedInputSize` which returns -1 if `ProduceSignature` fails, and returns the input size otherwise. We can reduce this to one call of `ProduceSignature` by using `CalculateMaximumSignedInputSize`'s result to set `solvable`.
Lastly, a lot of time is spent looking in `mapWallet` and `mapTxSpends` to determine whether an output is already spent. The performance of these lookups is slightly improved by changing those maps to use `std::unordered_map` and `std::unordered_multimap` respectively.
ACKs for top commit:
Xekyo:
ACK bc886fcb31
furszy:
diff re-reACK bc886fcb
Tree-SHA512: fd710fe1224ef67d2bb83d6ac9e7428d9f76a67f14085915f9d80e1a492d2c51cb912edfcaad1db11c2edf8d2d97eb7ddd95bfb364587fb1f143490fd72c9ec1
In order to avoid constantly re-deriving the same keys in
DescriptorScriptPubKeyMan, cache the SigningProviders generated inside
of GetSigningProvider.
Rename `BResult` class to `util::Result` and update the class interface to be
more compatible with `std::optional` and with a full-featured result class
implemented in https://github.com/bitcoin/bitcoin/pull/25665. Motivation for
this change is to update existing `BResult` usages now so they don't have to
change later when more features are added in #25665.
This change makes the following improvements originally implemented in #25665:
- More explicit API. Drops potentially misleading `BResult` constructor that
treats any bilingual string argument as an error. Adds `util::Error`
constructor so it is never ambiguous when a result is being assigned an error
or non-error value.
- Better type compatibility. Supports `util::Result<bilingual_str>` return
values to hold translated messages which are not errors.
- More standard and consistent API. `util::Result` supports most of the same
operators and methods as `std::optional`. `BResult` had a less familiar
interface with `HasRes`/`GetObj`/`ReleaseObj` methods. The Result/Res/Obj
naming was also not internally consistent.
- Better code organization. Puts `src/util/` code in the `util::` namespace so
naming reflects code organization and it is obvious where the class is coming
from. Drops "B" from name because it is undocumented what it stands for
(bilingual?)
- Has unit tests.
c4d76c6faa tests: Tests for inactive HD chains (Andrew Chow)
8077862c5e wallet: Refactor TopUp to be able to top up inactive chains too (Andrew Chow)
70134eb34f wallet: Properly set hd chain counters when loading (Andrew Chow)
961b9e4e40 wallet: Parse hdKeypath if key_origin is not available (Andrew Chow)
0652ee73ec Add size check on meta.key_origin.path (Rob Fielding)
Pull request description:
Currently inactive HD chains are only derived from at the time a key in that chain is found to have been used. However, at that time, the wallet may not be able to derive keys (e.g. it is locked). Currently we would just move on and not derive any new keys, however this could result in missing funds.
This PR resolves this problem by adding memory only variables to `CHDChain` which track the highest known index. `TopUp` is modified to always try to top up the inactive HD chains, and this process will use the new variables to determine how much to top up. In this way, after an encrypted wallet is unlocked, the inactive HD chains will be topped up and hopefully funds will not be missed.
Note that because these variables are not persisted to disk (because `CHDChain`s for inactive HD chains are not written to disk), if an encrypted wallet is not unlocked in the same session as a key from an inactive chain is found to be used, then it will not be topped up later unless more keys are found.
Additionally, wallets which do not have upgraded key metadata will not derive any keys from inactive HD chains. This is resolved by using the derivation path string in `CKeyMetadata.hdKeypath` to determine what indexes to derive.
ACKs for top commit:
laanwj:
Code review ACK c4d76c6faa
Tree-SHA512: b2b572ad7f1b1b2847edece09f7583543d63997e18ae32764e5a27ad608dd64b9bdb2d84ea27137894e986a8e82f047a3dba9c8015b74f5f179961911f0c4095
Refactors TopUp so that it also tops up inactive chains. The bulk of
TopUp is moved to TopUpChain.
CHDChain also has 2 new in memory variables to track its highest used
indexes. This is used only for inactive hd chains so that they can be
topped up later in the same session (e.g. if the wallet is encrypted and
not unlocked at the time of MarkUnusedAddresses).
3d71d16d1e test: listtranscations with externally generated addresses (S3RK)
d04566415e Add to spends only transcations from me (S3RK)
9f3a622b1c Automatically add labels to detected receiving addresses (S3RK)
c1b99c088c Return used destinations from ScriptPubKeyMan::MarkUnusedAddresses (S3RK)
03840c2064 Add CWallet::IsInternalScriptPubKeyMan (S3RK)
456e350926 wallet: resolve ambiguity of two ScriptPubKey managers providing same script (S3RK)
Pull request description:
This PR fixes certain use-cases when **send-to-self** transactions are missing from `listtransactions` output.
1. When a receiving address is generated externally to the wallet
(e.g. same wallet running on two nodes, or by 3rd party from xpub)
2. When restoring backup with lost metadata, but keypool gap is not exceeded yet
When the block is connected or tx added to mempool we already mark used keys. This PR extends this logic to determine whether the destination is a receiving one and if yes add it to the address book with empty label.
Works both for legacy and descriptors wallets.
- For legacy it uses the internal flag from the keypool entry. Caveat: because we don't know which script type would be used we add all possible destinations for such keys.
- For descriptor wallets it uses internal flag for the script pub key manager. Caveat: it only works for active descriptors.
fixes#19856fixes#20293
ACKs for top commit:
laanwj:
Code review ACK 3d71d16d1e
Tree-SHA512: 03fafd5548ead0c4ffe9ebcc9eb2849f1d2fa7270fda4166419b86877d4e57dcf04460e465fbb9c90b42031f3c05d1b83f1b67a9f82c2a42980825ed1e7b52e6
a99ed89865 psbt: sign without finalizing (Andrew Chow)
Pull request description:
It can be useful to sign an input with `walletprocesspsbt` but not finalize that input if it is complete. This PR adds another option to `walletprocesspsbt` to be able to do that. We will still finalize by default.
This does not materially change the PSBT workflow since `finalizepsbt` needs to be called in order to extract the tx for broadcast.
ACKs for top commit:
meshcollider:
utACK a99ed89865
Sjors:
utACK a99ed89
Tree-SHA512: c88e5d3222109c5f4e763b1b9d97ce4655f68f2985a4509caab2d4e7f5bac5047328fd69696e82a330f5c5a333e0312568ae293515689b77a4747ca2f17caca6
92993aa5cf Change SignTransaction's input_errors to use bilingual_str (Andrew Chow)
171366e89b Use bilingual_str for address fetching functions (Andrew Chow)
9571c69b51 Add bilingual_str::clear() (Andrew Chow)
Pull request description:
In a couple of places in the wallet, errors are `std::string`. In order for these errors to be translated, change them to use `bilingual_str`.
ACKs for top commit:
hebasto:
re-ACK 92993aa5cf, only rebased since my [previous](https://github.com/bitcoin/bitcoin/pull/22337#pullrequestreview-694542729) review, verified with
klementtan:
Code review ACK 92993aa5cf
meshcollider:
Code review ACK 92993aa5cf
Tree-SHA512: 5400e419dd87db8c49b67ed0964de2d44b58010a566ca246f2f0760ed9ef6a9b6f6df7a6adcb211b315b74c727bfe8c7d07eb5690b5922fa5828ceef4c83461f
bb822a7af8 wallet, rpc: add listdescriptors private option (S3RK)
Pull request description:
Rationale: make it possible to backup your wallet with `listdescriptors` command
* The default behaviour is still to show public version
* For private version only the root xprv is returned
Example use-case:
```
> bitcoin-cli -regtest -named createwallet wallet_name=old descriptors=true
> bitcoin-cli -regtest -rpcwallet=old listdescriptors true | jq '.descriptors' > descriptors.txt
> bitcoin-cli -regtest -named createwallet wallet_name=new descriptors=true blank=true
> bitcoin-cli -regtest -rpcwallet=new importdescriptors "$(cat descriptors.txt)"
```
In case of watch-only wallet without private keys there will be following output:
```
error code: -4
error message:
Can't get descriptor string.
```
ACKs for top commit:
achow101:
re-ACK bb822a7af8
Rspigler:
tACK bb822a7af8
jonatack:
ACK bb822a7af8 per `git diff 2854ddc bb822a7`
prayank23:
tACK https://github.com/bitcoin/bitcoin/pull/21500/commits/bb822a7af86897a9b6a5d616f193c258e8e76729
meshcollider:
Code review ACK bb822a7af8
Tree-SHA512: f6dddc72a74e5667071ccd77f8dce578382e8e29e7ed6a0834ac2e114a6d3918b59c2f194f4079b3259e13d9ba3b4f405619940c3ecb7a1a0344615aed47c43d
