Use interfaces::Init::make* methods instead of interfaces::Make*
functions, so interfaces can be constructed differently in different
executables without having to change any code. (So for example
bitcoin-gui can make an interfaces::Node pointer that communicates with
a bitcoin-node subprocess, while bitcoin-qt can make an interfaces::Node
pointer that starts node code in the same process.)
Currently addrman consistency checks are a compile time option, and are not
enabled in our CI. It's unlikely anyone is running these consistency checks.
Make them a runtime option instead, where users can enable addrman
consistency checks every n operations (similar to mempool tests). Update
the addrman unit tests to do internal consistency checks every 100
operations (checking on every operations causes the test runtime to
increase by several seconds).
Also assert on a failed addrman consistency check to terminate program
execution.
703b1e612a Close minor startup race between main and scheduler threads (Larry Ruane)
Pull request description:
This is a low-priority bug fix. The scheduler thread runs `CheckForStaleTipAndEvictPeers()` every 45 seconds (EXTRA_PEER_CHECK_INTERVAL). If its first run happens before the active chain is set up (`CChain::SetTip()`), `bitcoind` will assert:
```
(...)
2021-07-28T22:16:49Z init message: Loading block index…
bitcoind: validation.cpp:4968: CChainState& ChainstateManager::ActiveChainstate() const: Assertion `m_active_chainstate' failed.
Aborted (core dumped)
```
I ran into this while using the debugger to investigate an unrelated problem. Single-stepping through threads with a debugger can cause the relative thread execution timing to be very different than usual. I don't think any automated tests are needed for this PR. I'll give reproduction steps in the next PR comment.
ACKs for top commit:
MarcoFalke:
cr ACK 703b1e612a
tryphe:
tested ACK 703b1e612a
0xB10C:
ACK 703b1e612a
glozow:
code review ACK 703b1e612a - it makes sense to me to start peerman's background tasks here, after `chainstate->LoadChainTip()` and `node.connman->Start()` have been called.
Tree-SHA512: 9316ad768cba3b171f62e2eb400e3790af66c47d1886d7965edb38d9710fc8c8f8e4fb38232811c9346732ce311d39f740c5c2aaf5f6ca390ddc48c51a8d633b
82b6f89819 [style] Small style improvements to DNS parameters (Amiti Uttarwar)
4c89e24f64 [test] Test the delay before querying DNS seeds (Amiti Uttarwar)
6395c8ed56 [test] Test the interactions between -forcednsseed and -dnsseed (Amiti Uttarwar)
6f6b7df6bd [init] Disallow starting up with conflicting paramters for -dnsseed and -forcednsseed (Amiti Uttarwar)
26d0ffe4f2 [test] Test -forcednsseed causes querying DNS seeds (Amiti Uttarwar)
35851450a9 [test] Test the interactions between -connect and -dnsseed (Amiti Uttarwar)
75c05af361 [test] Test logic to query DNS seeds with block-relay-only connections (Amiti Uttarwar)
9c08719778 [test] Introduce test logic to query DNS seeds (Amiti Uttarwar)
Pull request description:
This PR adds a DNS seed to the regtest chain params to enable testing the DNS seed querying logic of `CConnman::ThreadDNSAddressSeed` and relevant startup parameters. Adds coverage for the changes in #22013 (and then some).
The main behavioral change to bitcoind is that this PR disallows starting up with conflicting parameters for `-dnsseed` and `-forcednsseed`.
The tests include:
* parameter interactions of different combinations of `-connect`, `-dnsseed` and `-forcednsseed`
* the delay before querying DNS seeds depending on how many addresses are in the addrman
* the behavior of `-forcednsseed`
* skipping DNS querying if we have outbound full relay connections & not block-relay-only connections
Huge props to mzumsande for identifying the timing technique for testing successful connections before running `ThreadDNSAddressSeed` 🙌🏽
ACKs for top commit:
mzumsande:
ACK 82b6f89819
jnewbery:
reACK 82b6f89819
Tree-SHA512: 9f0c29bfbf99426727e79c0a25606ae09deab91a92e3c5cee7f84c3ca7503a8ac9ab85a85c51841d40b164ef8c991326070f0b2f41d075fb7985df26f6e95d6d
Don't schedule class PeerManagerImpl's background tasks from its
constructor, but instead do that from a separate method,
StartScheduledTasks(), that can be called later at the end of startup,
after other things, such as the active chain, are initialzed.
-dnsseed determines whether we run ThreadDNSAddressSeed and potentially query
the DNS seeds for addresses. -forcednsseed tells the node to force querying the
DNS seeds even if we have sufficient addresses or current connections.
This commit disallows starting up with explicitly conflicting parameters.
a806647d26 [validation] Always include merkle root in coinbase commitment (Dhruv Mehta)
189128c220 [validation] Set witness script flag with p2sh for blocks (Dhruv Mehta)
ac82b99db7 [p2p] remove redundant NODE_WITNESS checks (Dhruv Mehta)
6f8b198b82 [p2p] remove unused segwitheight=-1 option (Dhruv Mehta)
eba5b1cd64 [test] remove or move tests using `-segwitheight=-1` (Dhruv Mehta)
Pull request description:
Builds on #21009 and makes progress on remaining items in #17862
Removing `RewindBlockIndex()` in #21009 allows the following:
- removal of tests using `segwitheight=-1` in `p2p_segwit.py`.
- move `test_upgrade_after_activation()` out of `p2p_segwit.py` reducing runtime
- in turn, that allows us to drop support for `-segwitheight=-1`, which is only supported for that test.
- that allows us to always set `NODE_WITNESS` in our local services. The only reason we don't do that is to support `-segwitheight=-1`.
- that in turn allows us to drop all of the `GetLocalServices() & NODE_WITNESS` checks inside `net_processing.cpp`, since our local services would always include `NODE_WITNESS`
ACKs for top commit:
mzumsande:
Code-Review ACK a806647d26
laanwj:
Code review ACK a806647d26, nice cleanup
jnewbery:
utACK a806647d26
theStack:
ACK a806647d26
Tree-SHA512: 73e1a69d1d7eca1f5c38558ec6672decd0b60b16c2ef6134df6f6af71bb159e6eea160f9bb5ab0eb6723c6632d29509811e29469d0d87abbe9b69a2890fbc73e
ceb7b35a39 refactor: move UpdateTip into CChainState (James O'Beirne)
4abf0779d6 refactor: no mempool arg to GetCoinsCacheSizeState (James O'Beirne)
46e3efd1e4 refactor: move UpdateMempoolForReorg into CChainState (James O'Beirne)
617661703a validation: make CChainState::m_mempool optional (James O'Beirne)
Pull request description:
Make `CChainState::m_mempool` optional by making it a pointer instead of a reference. This will allow a simplification to assumeutxo semantics (see https://github.com/bitcoin/bitcoin/pull/15606#pullrequestreview-692965905) and help facilitate the `-nomempool` option.
ACKs for top commit:
jnewbery:
ACK ceb7b35a39
naumenkogs:
ACK ceb7b35a39
ryanofsky:
Code review ACK ceb7b35a39 (just minor style and test tweaks since last review)
lsilva01:
Code review ACK and tested on Signet ACK https://github.com/bitcoin/bitcoin/pull/22415/commits/ceb7b35a39145717e2d9d356fd382bd1f95d2a5a
MarcoFalke:
review ACK ceb7b35a39😌
Tree-SHA512: cc445ad33439d5918cacf80a6354eea8f3d33bb7719573ed5b970fad1a0dab410bcd70be44c862b8aba1b71263b82d79876688c553e339362653dfb3d8ec81e6
Since we now have multiple chainstate objects, only one of them is active at any given
time. An active chainstate has a mempool, but there's no point to others having one.
This change will simplify proposed assumeutxo semantics. See the discussion here:
https://github.com/bitcoin/bitcoin/pull/15606#pullrequestreview-692965905
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
4101ec9d2e doc: mention that we enforce port=0 in I2P (Vasil Dimov)
e0a2b390c1 addrman: reset I2P ports to 0 when loading from disk (Vasil Dimov)
41cda9d075 test: ensure I2P ports are handled as expected (Vasil Dimov)
4f432bd738 net: do not connect to I2P hosts on port!=0 (Vasil Dimov)
1f096f091e net: distinguish default port per network (Vasil Dimov)
aeac3bce3e net: change I2P seeds' ports to 0 (Vasil Dimov)
38f900290c net: change assumed I2P port to 0 (Vasil Dimov)
Pull request description:
_This is an alternative to https://github.com/bitcoin/bitcoin/pull/21514, inspired by https://github.com/bitcoin/bitcoin/pull/21514#issuecomment-815049933. They are mutually exclusive. Just one of them should be merged._
Change assumed ports for I2P to 0 (instead of the default 8333) as this is closer to what actually happens underneath with SAM 3.1 (https://github.com/bitcoin/bitcoin/pull/21514#issuecomment-812632520, https://github.com/bitcoin/bitcoin/pull/21514#issuecomment-816564719).
Don't connect to I2P peers with advertised port != 0 (we don't specify a port to our SAM 3.1 proxy and it always connects to port = 0).
Note, this change:
* Keeps I2P addresses with port != 0 in addrman and relays them to others via P2P gossip. There may be non-bitcoin-core-22.0 peers using SAM 3.2 and for them such addresses may be useful.
* Silently refuses to connect to I2P hosts with port != 0. This is ok for automatically chosen peers from addrman. Not so ok for peers provided via `-addnode` or `-connect` - a user who specifies `foo.b32.i2p:1234` (non zero port) may wonder why "nothing is happening".
Fixes#21389
ACKs for top commit:
laanwj:
Code review ACK 4101ec9d2e
jonatack:
re-ACK 4101ec9d2e per `git range-diff efff9c3 0b0ee03 4101ec9`, built with DDEBUG_ADDRMAN, did fairly extensive testing on mainnet both with and without a peers.dat / -dnsseeds=0 to test boostrapping.
Tree-SHA512: 0e3c019e1dc05e54f559275859d3450e0c735596d179e30b66811aad9d5b5fabe3dcc44571e8f7b99f9fe16453eee393d6e153454dd873b9ff14907d4e6354fe
2feec3ce31 net: don't bind on 0.0.0.0 if binds are restricted to Tor (Vasil Dimov)
Pull request description:
The semantic of `-bind` is to restrict the binding only to some address.
If not specified, then the user does not care and we bind to `0.0.0.0`.
If specified then we should honor the restriction and bind only to the
specified address.
Before this change, if no `-bind` is given then we would bind to
`0.0.0.0:8333` and to `127.0.0.1:8334` (incoming Tor) which is ok -
the user does not care to restrict the binding.
However, if only `-bind=addr:port=onion` is given (without ordinary
`-bind=`) then we would bind to `addr:port` _and_ to `0.0.0.0:8333` in
addition.
Change the above to not do the additional bind: if only
`-bind=addr:port=onion` is given (without ordinary `-bind=`) then bind
to `addr:port` (only) and consider incoming connections to that as Tor
and do not advertise it. I.e. a Tor-only node.
ACKs for top commit:
laanwj:
Code review ACK 2feec3ce31
jonatack:
utACK 2feec3ce31 per `git diff a004833 2feec3c`
hebasto:
ACK 2feec3ce31, tested on Linux Mint 20.1 (x86_64):
Tree-SHA512: a04483af601706da928958b92dc560f9cfcc78ab0bb9d74414636eed1c6f29ed538ce1fb5a17d41ed82c9c9a45ca94899d0966e7ef93da809c9bcdcdb1d1f040
* When accepting an I2P connection, assume the peer has port 0 instead
of the default 8333 (for mainnet). It is not being sent to us, so we
must assume something.
* When deriving our own I2P listen CService use port 0 instead of the
default 8333 (for mainnet). So that we later advertise it to peers
with port 0.
In the I2P protocol SAM 3.1 and older (we use 3.1) ports are not used,
so they are irrelevant. However in SAM 3.2 and newer ports are used and
from the point of view of SAM 3.2, a peer using SAM 3.1 seems to have
specified port=0.
The semantic of `-bind` is to restrict the binding only to some address.
If not specified, then the user does not care and we bind to `0.0.0.0`.
If specified then we should honor the restriction and bind only to the
specified address.
Before this change, if no `-bind` is given then we would bind to
`0.0.0.0:8333` and to `127.0.0.1:8334` (incoming Tor) which is ok -
the user does not care to restrict the binding.
However, if only `-bind=addr:port=onion` is given (without ordinary
`-bind=`) then we would bind to `addr:port` _and_ to `0.0.0.0:8333` in
addition.
Change the above to not do the additional bind: if only
`-bind=addr:port=onion` is given (without ordinary `-bind=`) then bind
to `addr:port` (only) and consider incoming connections to that as Tor
and do not advertise it. I.e. a Tor-only node.
This is part of the "UTXO Set Statistics" project in Core, which aims
to make things like "checking coin supply" faster. This stuff, and
related things in coinstats.cpp, have always been broken for Elements
in the sense that we consider only explicit outputs and we ignore
assets (so everything just gets added together to get a meaningless
total). It probably wouldn't be too hard to restrict this to only
consider policyAsset, but it's out of scope for a rebase IMO.
Also, I think this situation is fine .. I don't understand the motivation
for this or why Core is merging this when they refuse to merge an address
index .. but I guess we'll see if there are users who care about this data
and who care about it being meaningful on Elements.
Also, apologies for the big diff -- there were some mechanical changes
to deal with CT amounts, but most of the changes related to the difference
in how fees are accounted for. While I'm not thrilled with this PR, its
functional test is really good! So I think what I eventually came up with
is internally consistent.
Provides DeploymentEnabled, DeploymentActiveAt, and DeploymentActiveAfter
helpers for checking the status of buried deployments. Can be overloaded
so the same syntax works for non-buried deployments, allowing future
soft forks to be changed from signalled to buried deployments without
having to touch the implementation code.
Replaces IsWitnessEnabled and IsScriptWitnessEnabled.
fa0d9211ef refactor: Remove chainparams arg from CChainState member functions (MarcoFalke)
fa38947125 refactor: Remove ::Params() global from inside CChainState member functions (MarcoFalke)
Pull request description:
The `::Params()` global is verbose and confusing. Also it makes tests a bit harder to write because they'd have to mock a global.
Fix all issues by simply using a member variable that points to the right params.
(Can be reviewed with `--word-diff-regex=.`)
ACKs for top commit:
jnewbery:
ACK fa0d9211ef
kiminuo:
utACK fa0d9211
theStack:
ACK fa0d9211ef🍉
Tree-SHA512: 44676b19c9ed471ccb536331d3029bad192d7d50f394fd7b8527ec431452aeec8c4494164b9cf8e16e0123c4463b16be864366c6b599370032c17262625a0356
