This makes a number of changes:
- Get rid of the verification_progress argument in the node interface
NotifyHeaderTip (it was always 0.0).
- Instead of passing a CBlockIndex* in the UI interface's NotifyHeaderTip,
send separate height, timestamp fields. This is becuase in headers presync,
no actual CBlockIndex object is available.
- Add a bool presync argument to both of the above, to identify signals
pertaining to the first headers sync phase.
bc886fcb31 Change mapWallet to be a std::unordered_map (Andrew Chow)
272356024d Change getWalletTxs to return a set instead of a vector (Andrew Chow)
97532867cf Change mapTxSpends to be a std::unordered_multimap (Andrew Chow)
1f798fe85b wallet: Cache SigningProviders (Andrew Chow)
8a105ecd1a wallet: Use CalculateMaximumSignedInputSize to indicate solvability (Andrew Chow)
Pull request description:
While running my coin selection simulations, I noticed that towards the end of the simulation, the wallet would become slow to make new transactions. The wallet generally performs much more slowly when there are a large number of transactions and/or a large number of keys. The improvements here are focused on wallets with a large number of transactions as that is what the simulations produce.
Most of the slowdown I observed was due to `DescriptorScriptPubKeyMan::GetSigningProvider` re-deriving keys every time it is called. To avoid this, it will now cache the `SigningProvider` produced so that repeatedly fetching the `SigningProvider` for the same script will not result in the same key being derived over and over. This has a side effect of making the function non-const, which makes a lot of other functions non-const as well. This helps with wallets with lots of address reuse (as my coin selection simulations are), but not if addresses are not reused as keys will end up needing to be derived the first time `GetSigningProvider` is called for a script.
The `GetSigningProvider` problem was also exacerbated by unnecessarily fetching a `SigningProvider` for the same script multiple times. A `SigningProvider` is retrieved to be used inside of `IsSolvable`. A few lines later, we use `GetTxSpendSize` which fetches a `SigningProvider` and then calls `CalculateMaximumSignedInputSize`. We can avoid a second call to `GetSigningProvider` by using `CalculateMaximumSignedInputSize` directly with the `SigningProvider` already retrieved for `IsSolvable`.
There is an additional slowdown where `ProduceSignature` with a dummy signer is called twice for each output. The first time is `IsSolvable` checks that `ProduceSignature` succeeds, thereby informing whether we have solving data. The second is `CalculateMaximumSignedInputSize` which returns -1 if `ProduceSignature` fails, and returns the input size otherwise. We can reduce this to one call of `ProduceSignature` by using `CalculateMaximumSignedInputSize`'s result to set `solvable`.
Lastly, a lot of time is spent looking in `mapWallet` and `mapTxSpends` to determine whether an output is already spent. The performance of these lookups is slightly improved by changing those maps to use `std::unordered_map` and `std::unordered_multimap` respectively.
ACKs for top commit:
Xekyo:
ACK bc886fcb31
furszy:
diff re-reACK bc886fcb
Tree-SHA512: fd710fe1224ef67d2bb83d6ac9e7428d9f76a67f14085915f9d80e1a492d2c51cb912edfcaad1db11c2edf8d2d97eb7ddd95bfb364587fb1f143490fd72c9ec1
For some reason, the primary consumer of getWalletTxs requires the
transactions to be in hash order when it is processing them. std::map
will iterate in hash order so the transactions end up in that order when
placed into the vector. To ensure this order when mapWallet is no longer
ordered, the vector is replaced with a set which will maintain the hash
order.
Rename `BResult` class to `util::Result` and update the class interface to be
more compatible with `std::optional` and with a full-featured result class
implemented in https://github.com/bitcoin/bitcoin/pull/25665. Motivation for
this change is to update existing `BResult` usages now so they don't have to
change later when more features are added in #25665.
This change makes the following improvements originally implemented in #25665:
- More explicit API. Drops potentially misleading `BResult` constructor that
treats any bilingual string argument as an error. Adds `util::Error`
constructor so it is never ambiguous when a result is being assigned an error
or non-error value.
- Better type compatibility. Supports `util::Result<bilingual_str>` return
values to hold translated messages which are not errors.
- More standard and consistent API. `util::Result` supports most of the same
operators and methods as `std::optional`. `BResult` had a less familiar
interface with `HasRes`/`GetObj`/`ReleaseObj` methods. The Result/Res/Obj
naming was also not internally consistent.
- Better code organization. Puts `src/util/` code in the `util::` namespace so
naming reflects code organization and it is obvious where the class is coming
from. Drops "B" from name because it is undocumented what it stands for
(bilingual?)
- Has unit tests.
817326a828 wallet: avoid rescans if under the snapshot (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11) (parent PR: #15606)
---
Refuse to load a wallet if it requires a rescan lower than the height of assumed-valid blocks.
Of course in live code right now, `BLOCK_ASSUMED_VALID` block index entries don't exist since they're a unique flag introduced by the use of UTXO snapshots, so this is prophylactic code exercised only by unittests.
ACKs for top commit:
achow101:
ACK 817326a828
ryanofsky:
Code review ACK 817326a828. This seems like the simplest change we can make to avoid wallet problems when an assumeutxo snapshot is loaded.
Tree-SHA512: cfa44b2eb33d1818d30df45210d0dde1e9b78cc9b7c88cb985054dc28427bba9e0905debe4196065d1d3a5ce7bca7e605e629d5ce5f0225b25395746e6d3d596
Replace CommitInternal method with CustomCommit and use interfaces::Chain
instead of CChainState to generate block locator.
This commit does not change behavior in any way, except in the
(m_best_block_index == nullptr) case, which was added recently in
https://github.com/bitcoin/bitcoin/pull/24117 as part of an ongoing attempt to
prevent index corruption if bitcoind is interrupted during startup. New
behavior in that case should be slightly better than the old behavior (skipping
the entire custom+base commit now vs only skipping the base commit previously)
and this might avoid more cases of corruption.
Add new interfaces::BlockInfo struct to be able to pass extra block
information (file and undo information) to indexes which they are
updated to use high level interfaces::Chain notifications.
This commit does not change behavior in any way.
111ea3ab71 wallet: refactor GetNewDestination, use BResult (furszy)
22351725bc send: refactor CreateTransaction flow to return a BResult<CTransactionRef> (furszy)
198fcca162 wallet: refactor, include 'FeeCalculation' inside 'CreatedTransactionResult' (furszy)
7a45c33d1f Introduce generic 'Result' class (furszy)
Pull request description:
Based on a common function signature pattern that we have all around the sources:
```cpp
bool doSomething(arg1, arg2, arg3, arg4, &result_obj, &error_string) {
// do something...
if (error) {
error_string = "something bad happened";
return false;
}
result = goodResult;
return true;
}
```
Introduced a generic class `BResult` that encapsulate the function boolean result, the result object (in case of having it) and, in case of failure, the string error reason.
Obtaining in this way cleaner function signatures and removing boilerplate code:
```cpp
BResult<Obj> doSomething(arg1, arg2, arg3, arg4) {
// do something...
if (error) return "something bad happened";
return goodResult;
}
```
Same cleanup applies equally to the function callers' side as well. There is no longer need to add the error string and the result object declarations before calling the function:
Before:
```cpp
Obj result_obj;
std::string error_string;
if (!doSomething(arg1, arg2, arg3, arg4, result_obj, error_string)) {
LogPrintf("Error: %s", error_string);
}
return result_obj;
```
Now:
```cpp
BResult<Obj> op_res = doSomething(arg1, arg2, arg3, arg4);
if (!op_res) {
LogPrintf("Error: %s", op_res.GetError());
}
return op_res.GetObjResult();
```
### Initial Implementation:
Have connected this new concept to two different flows for now:
1) The `CreateTransaction` flow. --> 7ba2b87c
2) The `GetNewDestination` flow. --> bcee0912
Happy note: even when introduced a new class into the sources, the amount of lines removed is almost equal to added ones :).
Extra note: this work is an extended version (and a decoupling) of the work that is inside #24845 (which does not contain the `GetNewDestination` changes nor the inclusion of the `FeeCalculation` field inside `CreatedTransactionResult`).
ACKs for top commit:
achow101:
ACK 111ea3ab71
w0xlt:
reACK https://github.com/bitcoin/bitcoin/pull/25218/commits/111ea3ab711414236f8678566a7884d48619b2d8
theStack:
re-ACK 111ea3ab71
MarcoFalke:
review ACK 111ea3ab71🎏
Tree-SHA512: 6d84d901a4cb923727067f25ff64542a40edd1ea84fdeac092312ac684c34e3688a52ac5eb012717d2b73f4cb742b9d78e458eb0e9cb9d6d72a916395be91f69
230a2f4cc3 wallet test: Add unit test for wallet scan save_progress option (Ryan Ofsky)
a89ddfbe22 wallet: Save wallet scan progress (w0xlt)
Pull request description:
Currently, the wallet scan progress is not saved.
If it is interrupted, it will be necessary to start from scratch on the next load.
This PR changes this and the progress is saved right after checking a block.
Close https://github.com/bitcoin/bitcoin/issues/25010
ACKs for top commit:
furszy:
re-ACK 230a2f4
achow101:
ACK 230a2f4cc3
ryanofsky:
Code review ACK 230a2f4cc3. Only change since last review is tweaking whitespace and adding log print
Tree-SHA512: 1a9dec207ed22b3443fb06a4daf967637bc02bcaf71c070b7dc33605d0cab959551e4014c9e92293a63f54c5cbcc98bb9f8844a8c60bc32a1482b1c4130fab32
